Vicmarc V01145 Tailstock Deep Drilling

SKU: 16-140
Stock: Pre-order
$1743.00  Inc. GST

Vicmarc V01145 Tailstock Deep Drilling 


The Vicmarc Deep Hole Drilling Tailstock can be used in place of a traditional tailstock and is suitable for fast and conventional drilling.  The Deep Hole Drilling Tailstock can drill up to depths of 215mm without having to repositioning it.  As this product has both horizontal and vertical adjustments it allows the Drilling Tailstock to be mounted on any Vicmarc VL200, VL240 or VL300 lathes (or similar sized lathes).

The Deep Hole Drilling Tailstock comes with a Morse 3 Taper, drill tang lock to prevent the drill from rotating in the taper, and a drift key ejecting slot to remove the drill.  Also included is a Morse 3 to Morse 2 adaptor to correctly align the Drilling Tailstock to the lathe centre height.

Vicmarc Deep Hole Drilling Tailstock fully retracted Single fast action stroke of 185mm
Fine adjustment up to 105mm extension Total Spindle Extension 215mm

Total centre height adjustment from 200mm to 300mm
Total bed gap 60mm + 1mm adjustment each side

© CWS Store 2024. All rights reserved. Terms & Conditions  |  Privacy Policy
Powered by SiteSuite