All shipping $15 Australia wide (excludes bulky items). International orders not accepted.
03 5243 0522 
Vicmarc Dovetail Jaws VM120/140/150
Vicmarc V00675 Dovetail Jaws 85mm to suit VM120/140/150
Dovetail Jaws have been designed for mounting bowls by expanding into a recess or clamping onto a spigot.
The sizes indicated on the drawing are when the Jaws form a perfect circle.
The sizes indicated on the drawing show the Jaw measurements at a perfect circle. VM120 and VM150 chucks provide approx. 48mm of expansion beyond these specified sizes shown with the exception of the 85mm Dovetails. All Dovetail Jaws have an internal dovetail angle of 13 degrees for clamping and an external dovetail angle of 13 degrees for expanding.
The Vicmarc range of Dovetail Jaws also have a machined taper on the face of the dovetail which aids in clamping both on a tenon (clamp mode) and in a recess (expansion mode). When clamping on a tenon it is often the case that the flat section of the bowl/tenon will be tapered the wrong way slightly or may have wood fibres or debris that can be in the corner of the tenon. With the jaws being slightly tapered it allows for a firm and accurate hold slightly away from the corner. This will ensure an accurate hold without wobble. When clamping in a recess the flat section is often tapered towards the centre of the bowl. This taper allows for a firm hold right in the corner (outermost diameter) which will ensure an accurate hold.
Select the size jaws from the list above.
85mm Dovetail Jaws 63mm internal diameter 85mm external diameter.
105mm Dovetail Jaws 84mm internal diameter 105mm external diameter.
128mm Dovetail Jaws 106mm internal diameter 128mm external diameter.
148mm Dovetail Jaws 126mm internal diameter 148mm external diameter.
173mm Dovetail Jaws 150mm internal diameter 173mm external diameter.
198mm Dovetail Jaws 175mm internal diameter 198mm external diameter.
223mm Dovetail Jaws 200mm internal diameter 223mm external diameter.
