Carrolls Woodcraft Supplies

YOUR ONE STOP SHOP FOR ALL YOUR WOODCRAFT SUPPLIES
| Enlarge
  • |
  • |

Power Tool Guide System

$14.90

Stock: Available

Product Code: Power Tool Guide System

When cutting panel product using a saw or router, most people muck around with a straight edge and two clamps, wasting time making sure its square and fixed in place and then the clamps get in the way anyway!

The Baladonia power tool guide is a low-profile tool guide with a built-in cam clamp that sits under the board and out of the way. The jaws automatically pull the guide close to square (with slight adjustment from aligning with a try-square) and can be quickly clamped in place and removed within seconds.

If you want to make sure the cut is accurate, square and repeatable make the small investment in the 300mm guide traveller. Cut and drill a 12mm MDF base to bolt your power tool in place and then mount to the traveller using the included bolts and knobs. Then run the traveller in the captive groove for maximum accuracy.

You require a Guide Traveler for each tool you want to use, this does not come with the track.

Select from the list below


TOP