Carrolls Woodcraft Supplies

| Enlarge

Tormek LA-120 Profiled Leather Honing Wheel


Stock: Out Of Stock

Product Code: 24-119

For the inside honing and polishing of turning gouges, carving gougesand V-tools. With exchangeable profiles. Mounts outside the standard honing wheel.


Leather Honing Wheel LA-120
Leather Honing Wheel LA-120

This wheel has exchangeable leather discs so you can easily replace a disc with a worn tip. Discs with alternative, narrower profiles are available as optional extra.

The two standard discs have a radius of 3 mm (1/8") and a 60º tip. The set of optional extra discs have a radius of 2 mm (3/32") and a 45º tip. These smaller disc profiles permit the honing of small carving tools with very narrow profiles. The diameter of the larger wheel has been increased from 100 mm (4") to 120 mm (4¾"), which speeds up the honing process.

This design has a larger and also deeper space between the two profiles compared to the previous LA-100, and therefore it permits inside honing of tools with wide and deep profiles.

You can fit the LA-120 outside your existing LA-100 (or the LA-100 outside the
LA-120) and use two discs on the same machine. You can also mount double
LA-120 wheels, one with standard profiles and one with set of narrow discs, and thus have access to four various profiles at the same time.

Exchange discs

LA-122. Standard leather honing discs.

LA-122. Set of standard spare discs.
One with a 3 mm (⅛") radius and one with a 60º tip.

LA-124. Optional leather honing discs.

LA-124. Set of optional, narrow discs.
One with a 2 mm (3/32") radius and one with a 45º tip.