All shipping $15 Australia wide (excludes bulky items). International orders not accepted.
These genuine Swansdown mops are made right here in Australia and are one of the best ways we have found to put a brilliant wax finish onto timber especially if you are using our EEE-Ultra Shine, Traditional Wax or both. They also work extremely well with Shellawax and Shellawax Cream.
Using one of these mops can cut the time it takes to buff a wax finish to a matter of seconds, depending upon the size of the work to be buffed. A tabletop will only take an couple of minutes easy work with the 100 fold buff compared to around 15 minutes or more of arm wrenching, back aching hand rubbing. It will leave a much nicer shine on the timber because it is working with the grain rather than putting swirls on the surface that you would get from using a lambs-wool buff, which works with a circular motion. These mops also work much cooler than a lambs-wool buff in a drill or angle grinder, making them much safer to use on surfaces that may be effected by heat.
The mops are made of genuine swansdown which is woven to form a soft fabric sheet of material called a fold these sheets are put together in a stack of 50, 75 , or 100, cut to size, securely fastened between two heavy washers and finally the centre hole is punched out.
We have 3 sizes of mop 100mm (4") diameter x 50 fold 150mm (6") x 75 fold, and 150mm x 100 fold.
The photo to the left shows the 150mm (6") x 100 fold mop being used with a drill. It is ideal for buffing large areas as it spreads to around 115mm (4.5") across its buffing surface when in use, making it easy to cover a large area with each pass. A tabletop with a width of 1 metre can easily be buffed in no more than 10 passes of the mop.