RZ Mask M2 Titanium Extra Large

SKU: 19-592
Stock: In Stock
$59.90  Inc. GST

RZ Mask M2 Titanium Extra Large


If you’re doing any kind of woodworking, you’re making dust. The fine dust generated by sawing, sanding and most other woodworking processes can get everywhere. And the one place you don’t want dust gathering is in your lungs!

Determine the right size mask for you by taking some measurements using the methods below.

  1. Measure from the bridge of your nose to the tip of your chin. You might find this easier to have someone assist you.

Note: Measure from the height of the bridge of your nose (usually just below your eye line) down to the tip of your chin. Do not measure beyond the tip of your chin.

  1. Match your measurements with the sizes outlined below. RZMasks are normally available in 3 different sizes. If you measure in-between sizes, it is recommended you select the size down to allow for a tighter seal.

RZMasks are available in the following sizes


90 – 100mm (3.5 – 4in)


100 – 114mm (4 – 4.5in)

Extra Large

114mm + (4.5in +)

Fitting Guide

The correct fit is key to the efficiency of filtration and comfort. There are a few tips and tricks to help you get the proper fit.

  1. When fitting your mask, place the top most part of the mask on the very top of your nose and lower the mask to cover your mouth and chin. Finish by fastening the strap(s) to a comfortable but secure fit.
  2. A proper seal is only required on the filter, not the mask shell. The filter inside the mask creates the seal over your face, while the mask shell does have some slack. This is an acceptable fit and as long as the filter is creating the seal, the mask is deemed effective
© CWS Store 2024. All rights reserved. Terms & Conditions  |  Privacy Policy
Powered by SiteSuite