Robert Sorby Pro Edge Large Knife Sharpening Kit

Robert Sorby Pro Edge Large Knife Kit

The jig consists of all parts required to convert a ProEdge, a new back plate, raised wear plate, universal arm and knife holder.

The kit includes instructions on fitting and should only take a few minutes to fit onto the ProEdge.

The jigs are universal so a customer can buy the other knife holder to enable all sizes to be sharpened.

The clamp on the knife holder has three screws, two clamping screws and a jacking screw to enable different thickness of blades to be safely held.

The adjustable collar on the arm will allow different bevel angles to be sharpened from a steep angle for a woodcarving knife to a shallow angle for a fish filleting knife.