Osmo 4006 Wood Protector

SKU: 09-903
Stock: In Stock
$80.25  Inc. GST

Osmo 4006 Wood Protector 750ml

Size:
QUANTITY:

Osmo Wood Protector is a clear, matt finish, wood primer and preservative for interior and exterior timbers.

Specifically designed for timbers which are susceptible to blue stain and mould - such as Pine, Douglas Fir (Oregon) and some spruce species - which are being used in areas of damp and high humidity, like bathrooms, laundries and interior window frames.

Wood Protector is biocide free, and is suitable for use on children's toys and playground equipment. It is based on natural oils and waxes, and is extremely water repellant. Only one coat is required, followed by a top coat of Polyx Oil.

1 litre covers approx. 6-8.4 m² with one coat. Product coverage depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to reduced coverage

Advantages:

  • Only one coat is required, followed by a top coat of Osmo Polyx®-Oil 
  • Extremely water resistant
  • Biocide free
  • For interior and exterior use
  • Very durable and hard wearing
  • Based on natural oils and waxes
  • Food safe once cured
  • Extremely stain resistant
  • Microporous breathable finish which does not crack, peel or flake
  • Suitable for children's toys, cots, bassinets and playground equipment

Product Details:

  • Coverage: Approximately 8 square meters per litre with one coat
  • No of coats: 1
  • Application: Good quality brush, low nap (3-5mm) microfibre roller, lint-free cloth or an Osmo Easy Pad
  • Drying time: 24 hours
  • Wood Protector can send some timbers slightly dark, Always test on a small area or off cut before proceeding
  • Storage times: 5 years unopened, 1 year once opened.

Additional Advice:

It may also be used as a priming coat on timber bench tops and vanities, prior to finishing with Top Oil, however, it's use will darken the timber slightly. While the use of Wood Protector is not essential on timbers which do not contain blue mould, it's wax content will help to waterproof the timber's surface and stop watermarking, prior to applying one or two top coats of your chosen Osmo finish.

Only one primer coat of Wood Protector is required, followed by two top coats of the desired Osmo finish

© CWS Store 2024. All rights reserved. Terms & Conditions  |  Privacy Policy
Powered by SiteSuite