Kunos Counter Top Oil
Product Code: Kunos Counter Top Oil
Range of application For solid interior timber surfaces, e.g. for bathroom furniture, window sills and working boards like oak, alder, beech, maple and others. Not to be used on veneer, Multiplex boards, plywood or the
interior of cabinets. To improve the water resistance of surfaces coated with KUNOS Natural Oil
Sealer No. 244 or ARDVOS Universal Wood Oil No. 266, paint over with KUNOS 243.
Technical qualities Prevents temperature-caused discoloration of light wooden surfaces, e.g. by warm drinks in porcelain cups. Transparent, lustrous, open-pored, water resistant according to DIN 68 861, part 1. Produces a
surface finish after 2-3 applications. DIN 53 160 certified for color fastness when exposed to
perspiration and saliva DIN EN 71, part 3 certified as suitable for toys.
Application method By brush, roller or with a wadded cloth (undiluted), or with spraying device (diluted with SVALOS
Thinner No. 293) at temperatures above 16°C (60°F). Test coat is recommended.
Coverage First coat: 1 undiluted liter (1.06 quart.) is sufficient for appr. 22 m² (237 ft²), i.e. 45 ml/m².
Second coat: 1 undiluted liter (1.06 quart.) is sufficient for appr. 88 m²/l (947 ft²), i.e. 11 ml/m².
Third coat: 1 undiluted liter (1.06 quart.) is sufficient for appr. 295 m²/l (3.175 ft²), i.e. 4 ml/m².
Coverage depends on surface condition and absorbency. Pre-testing your project is recommended.
For spraying: add 30 % max. SVALOS Thinner No. 293
Drying time At 23oC (73oF) and 50% relative humidity: First coat 16 hrs, subsequent coats 16 hrs, final degree of
hardening is reached after 4 weeks.
Wooden Surface Preparation
Wood must be dry (moisture content below 12 %), solid, able to absorb, clean, free of resin and dust.
Brush large-pored wood such as oak, ash, chestnut, elm, mahogany or teak carefully, to clean pore
grooves. Sand furniture gradually up to 240 grain, for oak use 180 grain.
Depending on surface requirements and absorbency: Apply 1 to 3 thin coats, until a surface layer has
developed. Remove excess oil approximately 3 minutes after applying the first coat with a lint-free
cloth, otherwise an uneven shiny surface might develop. Sand with 400 grain between the 1st and 2nd
applications. Remove 2nd coat 3 minutes after application, sanding before the application of the 3rd
coat is not necessary. Let dry. Remove 3rd coat 3 minutes after application as well. Between the
applications of the individual coats, let dry for at least 16 hours.
Maintenance should be carried out according to usage. As a rule 1 — 2 times annually. Prepare the
surface with 280 — 320 grain, then rub or polish a thin coat of KUNOS Countertop Oil No. 243. Clean
with a damp cloth with TRENA pH-Neutral Cleaner No. 556 diluted in water.
Stir thoroughly before use. Remove possible skin formed on surface. Test coat is recommended.
The open time during the application can be extended by adding up to 10% of SVALOS Thinner No.
On oak and other wood with incompatibilities such as tannic acid or dyes, or on wood that has been
sanded, stripped, pre-treated, or stained, discoloration is possible and will show up within one week
of application date. Please note that KUNOS No. 243 is not suitable as a sealant on strained wood.
For glued crosscut wood, observe a treated test area for two days before completing application, as
certain adhesives may dissolve. Adhesives and glues have to be completely dry before treating with
We have availble 250ml and 750ml containers on the shelf but larger quantities are available on request.
- What's New
- Browse By Brand
- Books DVDs and Magazines
- Chucks and Accessories
- Clamps, Vices & Workholding Devices
- Clocks and Accessories
- Craft Supplies
- Cutlery Blanks
- Glues & Sealers
- Hand Tools & Accessories
- Hardware & Fixtures
- Machinery and Accessories
- Measuring & Marking
- Pen Parts
- Power Carving
- Protective Safety Wear
- Pyrography Woodburning
- Routing and Accessories
- Sharpening - Sanding and Grinding
- Scrollsaws and Accessories
- Weather Movements
- WoodLathe Accessories
- Woodturning Tools
- Gift Vouchers