Incra IRT-075 T Rule 75mm Metric Tiny

When accuracy counts... INCRA RULES!

Super accurate measuring and layout tools that enable woodworkers of all experience levels to improve the quality of their work. The INCRA Rules use a simple mechanism to make all layout work fast, repeatable, and dead-on accurate.

With the Precision Tiny T-Rule you can ditch the combination square and remove the need to constantly readjust for different measurements. Tiny holes and slots in the rule allow you to locate your pencil mark exactly on target every single time. 

Marking relative to the end or edge of your workpiece:

Put the T-Bar against the edge of your workpiece, then make your mark in the hole or slot at the desired measurement.

Drawing a line parallel to the edge of your workpiece:

You can draw a line by sliding the T-Bar along the edge of your workpiece while holding your pencil vertically in one of the holes at your desired measurement.

For use with any 0.5mm mechanical pencil or scribe.

75mm Metric Tiny T-Rule