Baladonia TRS-0224 Circle Marking Trammel Set with 610mm Rule

This item is a personal favourite of ours here at CWS due to its simple, yet effective design. Utilizing a piece of 610mm t-track with a scale attached to the back of the extruded and anodized aluminium profile gives you a perfectly straight trammel arm that can scribe circles up to 1220mm diameter.

Taking 25mm-diameter solid aluminium rod, the two heads are precision milled so they snugly saddle the trammel with zero sideplay, yet slide freely up and down the arm to make it easy to adjust accurately. Because of the rectangular cross-section, the heads cannot rotate or twist once locked in place against the bar using solid brass knurled screws that do not damage the side of the bar.

The measurements are easily adjusted - simply line the first head up flush with the end of the trammel arm and use the edge of the second head closest to the first head to measure out the radius, no need to measure between the two points on a separate rule.

Included are two hardened steel points for normal scribing work on timber, man-made board or metals, as well as a pointed knife for marking through more difficulty-grained timbers. It also has a pencil for better legibility if required.